Wait for the install to complete before continuing with the next command. A count of frames that were successfully transmitted as indicated by the transmit status Transmit OK to the broadcast address. Shows the available properties and their values for the selected adapter. If Jumbo Frames is not one of the properties listed for a selected adapter, the feature is not supported. VLANs can only be created when all team members are Broadcom adapters. For a single-port adapter, the function number is 0. Selects Magic Packet as the wake-up frame.
|Date Added:||2 January 2007|
|File Size:||54.59 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
VLANs enable you to add multiple virtual adapters that are on different subnets. To view the configuration of the team, click Preview before clicking Apply.
Provides detailed performance statistics for the selected adapter. This is normal behavior.
The number of bits that the bus can transfer at a single time to and from the adapter. This information allows you to determine whether a problem you may be experiencing is related to the adapter or if the cabling is too long. This locally administered address consists of a digit hexadecimal number.
This test verifies the read and write capabilities of the registers of the physical layer PHY. Set the probe interval the number of seconds between each retransmission of a link packet to the probe target and the maximum number of probe retries the number of consecutively missed responses from a probe target before a failover is triggered.
windows 7 – Configure multiple VLAN on a Broadcom NetXtreme 57XX adapter – Super User
The team status is also graphically indicated by the appearance of the icons representing the team and the team members. If the team type is an SLB type team, click Next. This minimizes the downtime cohtroller to spanning tree loop determination when failing over. A count of the frames that are involved in more than one collision and are subsequently transmitted successfully. You can specify up to three additional probe targets to serve as backups by assigning IP addresses to the other probe targets.
Click the name of the file to be restored, and then click Open. If you want to review or change any of your settings, click Back. Change the type of team.
The file contains information about both the adapter and the team configuration. Click the desired maximum number of probe retries in the Probe maximum retries list. Frames Tx after Deferral. Every adapter in the network must have its own unique MAC address. If the team type is not an SLB type team, then a dialog box appears.
If you want to always use Expert mode to create a team, select the Default to Expert Mode check box.
Brooadcom Send Offload Broqdcom Requests. BACS2 also enables you to perform detailed tests, diagnostics, and analyses on each adapter, as well as to view and modify its property values and view traffic statistics. If all of the active adapters on the team fail or are disconnected, the standby member takes over the handling of the network activities.
A count of directed data frames that are successfully received. This item is not available for PCI Express type adapters.
You must have administrator privileges to perform diagnostics. Before you begin the update, close all applications, windows, or dialog boxes.
802.1q support for broadcom netxtreme 57xx gigabit controller
Frames Tx with more than one Collision. 57xx driver that is associated with the adapter has not been loaded by Windows. There must be at least one Broadcom network adapter assigned to the team.
The bus clock signal frequency used by the adapter. On the installation CD or from the location to which you downloaded the software driver package, open the MgmtApps folder, open the folder for your operating system, and then double-click Setup.