A similar test can then be done on the UB-E03, UB-E04 adapter by inserting a paperclip through the small hole in the adapter for 3 seconds. If successful, it will print out the IP address it is using. Connect a computer directly to an Ethernet printer using a crossover cable For example if the printer was set to Subnet mask setting is not correct. Paper size roll paper.

Uploader: Gut
Date Added: 15 September 2012
File Size: 67.1 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 23990
Price: Free* [*Free Regsitration Required]

The TM printer is turned off. What’s in the box. If successful, it will print out the IP address it is using. Also turn off bidirectional supportif enabled. If you would like to register as an Epson partner, please click here.

How to connect an Epson POS Printer with an Ethernet Adapter

Currently, only a handful of HP printers are capable. The printer you will receive is the exact one shown in the photos. RJ Female connector on computer and adapter end.

Step by Step Installation To espon to your local network the Ethernet printer must be set to settings compatible with your network. You may need to make a few changes in the printer settings to get it to work with the Ethernet adapter.


Power AC Adapter Port. The IP address of the printer has changed.

Verify that the interface is “serial” for this type of Ethernet adapter and that the baud rate is the same as is set on the card. The configuration report will now print. This special cable allows you to bypass using a router or switch to connect a computer to a printer for testing.

There is a scuff on the top cover other than that this unit is in ;os shape. The printer will print a list of initial settings including interface type and buffer capacity. Otherwise in good condition. If changing a printer to Ethernet you must change the specific dip switch on the Epson printer to allow for the Ethernet card. Turn the printer off. Find a dealer Location. The installation step vary slighting depending on the type of Ethernet card you have.

Epson TM-T88IV Printer Drivers

Turn on the TM printer. This shows that the printer, module, and firmware are all installed and operating correctly and shows how the communication parameters are tmt-88iv. Connect the power cable to the printer and apply power. The printer should be visible in the printers folder of the Windows Control Panel. Confirm the settings for the other devices. We used these printers for about 2 months before switching to the Bluetooth version.


Generally speaking the adapter must be in the same sub domain as the computer to tm-t88ivv able to log on see previous section for how to configure the PC to the same subdomain.

TM-T88IV – Software & Document – Thermal line Printer – Download – POS – Epson

Change the dip switch 1 to ON. Give us the opportunity to resolve any issues with mutual understanding.

For example of the adapter shows an IP address of Sign up using Email and Password. To connect to your local network the Ethernet printer must be t,-t88iv to settings compatible with your network. With its mm per second print speed, enhanced graphic capability and increased user memory, the TM-T88IV delivers ultra-fast results.