Bios Menu Screen At the bottom right corner of a menu screen are the navigation keys for that particular menu. Locate the pin ZIF socket on the motherboard. Refer to Table 2 for configurations. Table Of Contents Safety information If this happens, revert to the default setting.
|Date Added:||22 May 2012|
|File Size:||9.36 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Use the navigation keys to select items in the menu and change audko settings. The configurations depends on the type of CPU installed.
Assign an IRQ to the card. CPU Parameter Recall feature.
If possible, disconnect all power cables from the existing system before you add a device. If an audio device is detected, the onboard audio controller xudio enabled; The system may become unstable and may experience difficulty powering up if the power supply is inadequate.
If this happens, revert to the default setting.
Before you start installing the motherboard, and hardware devices on it, check the items in your package with the list below. Insert the floppy disk that contains the BIOS file. If you made changes to fields other than system date, system time, and password, the BIOS asks for a confirmation before exiting. Copy the original or the latest motherboard BIOS to the bootable floppy disk.
ASUS P4P800S-X – motherboard – ATX – Socket 478 – i848P Series
Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector. This jack connects to external audio output devices. Use a grounded wrist strap or touch a safely grounded object or to a metal object, such as the power supply case, before handling components to avoid damaging them due to static electricity.
See page for details. This Line Out lime jack connects a headphone or a speaker. It’s a community-based project which helps to repair anything. Limited allows change to only selected fields, such as Date and Time.
Lets the BIOS configure all the devices in the system. When set to Auto, the data transfer from and to the device occurs multiple sectors at a time if the device supports multi-sector transfer feature.
Setting wrong values in below sections may cause system to malfunction. Doing so may cause system boot failure! View Only allows access but does not allow change to any field. The User Password item on top of the screen shows the default Not Installed. Page 5 Chapter 3: F10 key can be used for this operation. When you remove any chassis component, the sensor triggers and sends a high-level signal to this lead to record a chassis intrusion event.
Setting wrong values in below sections may cause system to malfunction. The illustration below shows the location of the onboard LED. The BIOS information on the screen is for reference only. It includes brief descriptions of the motherboard components, and illustrations of the layout, jumper settings, and connectors.
P4PX | ASUS Global
Because motherboard settings and hardware options vary, use the setup procedures presented in this chapter for general reference only. Click Start, then select Run.
Select an item then press Enter to display the configuration options. Boot Sector Virus Protection [Disabled] Allows you to enable or disable the boot sector virus protection.